Remember, a cracked laptop screen can affect the overall functioning of the device in some cases. Some of the most common ways how a laptop is damaged include: when it accidentally falls and the screen cracks, when it’s held at an awkward angle or if you unknowingly placed something heavy on the laptop. Laptops are fragile and can easily break, especially with more and more thinner and lighter models being launched now. So, it’s best to leave this job to an expert. We wouldn’t recommend you try resolving it yourself, as this is more complex and you could end up damaging the circuit board and the backlight lamp. Even if one of these two components fail, the screen will need to be replaced, unless the service center can help by just replacing the bulb. If the inverter board or bulb fail, you will experience the problem of a dimmed display. The inverter board converts the low voltage your laptop uses, into higher voltage required by the long bulb that lights up the LCD screen. Behind the LCD, there is an inverter board and backlight bulb which control the picture. If the issue still persists, it is mostly due to a failure of the LCD. Also, check if the AC adapter cord is loose and firmly connect it to the outlet and laptop. This could just be a system error that can be resolved by restarting the device. If the display is still dim, try restarting the device. Dimmed Displayįirstly, check if your laptop’s brightness level is set to maximum. In case, this doesn’t help you could get the motherboard checked. If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press ‘Enter’ Press the power button to turn on the laptop and you will notice that the laptop starts normally or a startup menu opensħ. Now, place the battery back in the battery compartment and plug the AC adapter back into the laptop but do not connect any other devices.Ħ. With the battery and power cord unplugged, press and hold the power button for about 20 seconds to drain any charge from the capacitorsĥ. Remove the battery from the battery compartmentĤ. Also unplug the AC adapter from the laptopģ. Disconnect all the connected devices like USB devices and printers. Turn off your laptop and disconnect it from the power socket.Ģ. Before going ahead and getting the motherboard repaired or replaced, you could try performing a hard reset (also known as a factory reset), which can mostly help in resolving the blank display issue.ġ. The first thing to do is to transfer all the data to another drive to make sure your data is safe. On turning on the laptop when you see the lights blinking and hear the fan working but if the laptop screen is blank and doesn’t display anything, this is again an indication of a faulty motherboard. If it does, the issue is certainly in the LCD panel. To be sure about the LCD screen problem, try connecting your laptop to another monitor and see if the issue persists. If you continue to see coloured lines, the issue is probably with the LCD screen, which will need to be replaced from the brand’s service center. To try fixing it yourself, first unplug your laptop, hold the power button for 30 seconds and restart the laptop. If you ever notice multi-coloured or single-coloured vertical lines on your laptop screen, it may be a result of a hardware failure or due to damage to the screen. Getting the motherboard repaired could cost you anywhere up to Rs 10,000, whereas the cost of replacing the motherboard can go anywhere up to Rs 25,000. You can either get the motherboard repaired or replaced by the brand service center. If that doesn’t help, it’s a clear indication of a motherboard-related issue. If you see some lights turning on but the device is still not booting, it’s time to replace the DC jack. If the DC jack has broken, you can try adjusting the plug’s angle in its jack.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |